Simpson AN-6601 Series Counter
A Simpson Encoder and Counter are to be used to Chariot with SE Encoder
measure and cut raw material to length. A dual speed motor is used to allow selection of high speed,
low speed Air Cylinder and stop. A pneumatic shear allows the
Simpson AN-6602 Counter Series
A Simpson Counter is to be used to count cans of beverage produced.
An appropriate photo eye and reflector has already been selected and installed.
Simpson AN-6603 Counter Series
A Simpson Counter is to be used to measure the flow rate of product pumped from a storage tank into shipping containers.
A !(R)Pulse Wheel!ˉ flow gauge is used to detect Pump
flow of liquid into the pump infeed pipe.During pumping
Simpson AN-6604 Counter Series
A Simpson Encoder and Counter are to provide digital position indication of a drill press table. The position of the table is adjusted by a hand crank. To prevent fixture damage, the Counter is to allow drill operation only if the table is locate
Simpson AN-6605 Counter Series
A Simpson Counter and encoder are to be used to measure the speed of a machine drive shaft in RPM.
A lamp is to be activated when the RPM is within a specified operating range.
Simpson AN-6606 Counter Series
A Simpson Counter is to be used to indicate when the 100 play on a new game machine has been completed. The casino owner will award a promotional gift to the lucky customer.
This special promotion is independent of the machine normal payout
Simpson AN-6607 Counter Series
A Simpson Encoder and Counter will be used to monitor the drum of a concrete mixer. The counter will control mix and pour cycles. Monitoring of drum speed and overspeed indication is also required.
In mixing mode, the
Simpson Panel Meter Wiring Instructions ,
FOR Simpson Digital Panel Meters ,simpson Advanced Digital Panel Meters ,GIMA Digital Panel Meters,S660 Series Counters,Analog Panel Meters,