Simpson228 ,AC/DC Leakage Current Tester

Simpson228 ,AC/DC Leakage Current Tester

Test for dangerousleakagecurrentwiththeSimpsonModel228,designed to meet thelatestUL,IEC,andANSIspecifications.The228 detects both ACandDCleakagecurrentandsimulateshumanresponse atthreedifferentlevels--reaction,let-go, andburnhazard. Each Model228comeswithtestleads withalligatorclips,manual, andbatteries.

• Detects dangerous AC&DCleakagecurrentpresentontheconductive surfacesofelectricalorelectronicequipment
• Designed to meet new IEC, ANSI, and ULguidelines
• Reaction, Let-Go and Unweighted Burn Hazardnetworkmeasurements
• Battery-powered for maximum portability

  Simpson 228 Special Purpose AC/DC Milliameter Designed specificallytomeasurehazardous"LeakageCurrents"or"TouchCurrents"which mayappearwhenapersontouchestheconductive surfaceofelectricalorelectronicequipment.The228is designed inaccordancewithIEC,ANSIandULguidelines. • True RMS Readings • Reads in Measurement Indication Units (MIU) up to .005 MIU • Output AllowsMeasurementofPeakCurrentinNon-SinusoidalWaveForms • Let-Go, Reaction, and Burn Hazard Response Networks • Detects dangerous AC & DC Leakage currents • Includes Test Leads, Alligator Clips, Batteries and Manual

• Specifications

  GENERAL	Reaction ResponseNetwork	Let-Go ResponseNetwork	UnweightedBurnHazard Response Network
  Equivalent network component values:	Complies with values specified in IEC 990 (excluding fuse)
  Equivalent measuring instrument load:	1 MΩ- 10pF	1 MΩ- 62 pF	1 MΩ- 1 pF
  Ranges:	0.3, 1, 3, 10 M.I.U.	0.3, 1, 3, 10 M.I.U.	0-100 mA RMS
  Current accuracy:	±2% F.S. @ 60 Hz
  Meter measurement method:	True RMS
  Meter frequency response:	(Relative to ANSI C101-1992 or UL-1459 2nd edition)
  DC to 1 Hz	Pointer shall track within 5% of peak
  2Hz to 19Hz (Accuracy not supported)
  20 Hz to 200 KHz	±2% F.S.	±2.5% of F.S.	±2% F.S.
  200 KHz to 1 MHz	±2% F.S.	±2.5% F.S.	±5% F.S.
  Output sensitivity:	Full scale meter indication equals 1V RMS (Measured with a 1 MΩ- 12 pF load)
  Output accuracy:	±2% of reading @ 60 Hz
  Output frequency response:	(Relative to ANSI C101-1992 or UL-1459 2nd edition)
  DC to 50Hz	±2% of reading
  50 Hz to 100 KHz	±2.5% of reading	±2% /-3% of reading		±2% of reading
  100 kHz to 1 MHz	±5% of reading
  Voltmeter range:	0-300 V (AC or DC)
  Voltmeter accuracy: DC to 1 Hz	Pointer shall track within 5% of peak
  2Hz to 19Hz (Accuracy not supported)
  20 Hz to 1KHz	±3% F.S. @ 60 Hz (Add ±1% for every additional 100Hz)
  Voltmeter frequency response:	DC to 1 KHz
  Power requirements:	Power requirements: (2) 9V (NEDA 1604A) batteries
  Physical:	7" x 5.25" x 3.125", 2-1/2 lbs (1.4kg),ABSplastic,fusedinput
  Environmental:	27°C ±2° C, 70% non condensingrelativehumidity.Outsidethisrangederateby10% per °C
  Maximum operating range:	0° to 40° C