60QLK~5600QLK
(1) Loosen the lock screw. (See Fig.1)
(2) Turn the sub-scale, and adjust a torque value. (Plus the mainscale to the subscale) (See Fig.2)
(3) Tighten the lock screw. (When the pin touch the lock screw,pinposition is changed)

7000QLK~14000QLK
(1) After the extension bar is mounted (SeeFig.3),
insert a hexagonal side of an auxiliary adjusting boxwrench.
Without theextension bar installed (See Fig.4), insert the hexagonal side ofthe adjusting box attached to the body.
(2) By turning the adjusting box wrench, set a torque value. (Plusthe main scale to the sub-scale.)
(3) The extension bar should be fully installed to the body tillthe root.